Pneumatics Northern

35mm up Cylinders

Cylinders

The new ECOPLUS, cylinder manufactured according to ISO 15552 is the rest of the experience made on the 1319-1320-1321 series.

The new family comprises of two sub categories:

ECOPLUS (T) - Manufactured with high resistance technopolymer end caps, the same used on the 1380-1381-1382 series.

ECOPLUS (M) - Manufactured with aluminium die cast end caps. The barrel is common to both series and includes, on three sides, 2 grooves to suit, without the need of adaptors, the 1580 slim series magnetic sensors.

The piston design is based on the very well tested design of the 1380 series therefore comprising two half piston manufactured in acetylic resin which ensure very good rod guide and already include the cushion cones. The piston seals are NBR as standard but are also available in polyurethane upon request. The magnet is fitted between the two half pistons.

The unites can be mounted using threaded holes in the end cap mounting screws or via the 1380 series accessories.

The possibility of choosing between tecnopolimer and aluminium end caps ensure the possibility of choosing the best product for the application.

Construction Characteristic

End platers Series 1386 + 1388: Higt resistant, termoplastic material
Series 1396 + 1398: Aluminium Die Cast
Rod C43 chromed steel or stainless steel
Barrel aluminium alloy anodised
Rod-guide bushing self-lubricating sintered bronze
Half-Piston Acetylic resin
Seal NBR rubber or polyurethane upon request
Rod-seal Polyurethane
Cushion adjusting screws Brass

Technical characteristic

Fluid filtered and preferably lubricated air or non
Maximum working pressure 8 bar
Working temperature -5 C +50 C

Standard stroke

ø 12 and ø 16
15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 mm
ø 20 and ø 25
15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 - 160 - 200 - 250 - 300 mm


Maximum tightening torque for fittings

Bore Thread Maximum torque (Nm)
Ø 12 M6 1
Ø 16 M6 1
Ø 20 G 1/8 4
Ø 25 G 1/8 4


Contact Us Download PDF